10

Loading video...

Jesus MesaGabe Whisnant

By Jesus Mesa and Gabe Whisnant

0

Share

Newsweek is a Trust Project member

See more of our trusted coverage when you search.Prefer Newsweek on Googleto see more of our trusted coverage when you search.


A Southwest Airlines plane and a private jet had a close call at Chicago Midway Airport on Tuesday morning, forcing the flight crew to perform a go-around to avoid a potential incident.

Southwest Flight 2504, arriving from Omaha, Nebraska, safely landed after maneuvering to avoid the other aircraft on the runway, the airline confirmed to multiple media outlets.

Why It Matters

The incident follows a series of significant events in the aviation industry in 2025. On January 29, a catastrophic mid-air collision occurred over the Potomac River near Washington, D.C., involving American Airlines Flight 5342, a Bombardier CRJ700, and a U.S. Army Sikorsky UH-60 Black Hawk helicopter. Tragically, all 67 people aboard both aircraft died, making it the deadliest U.S. air disaster in nearly 24 years.

Read More on U.S.

The Trump administration, through the Department of Government Efficiency (DOGE), cut about 400 probationary employees from the Federal Aviation Administration (FAA), including those in roles that support safety inspectors and airport operations.

Transportation Secretary Sean Duffy said that critical safety positions were unaffected. However, union representatives and former employees contended that the layoffs encompassed essential support staff, including aviation safety assistants and maintenance mechanics, whose roles are vital to maintaining aviation safety standards.

What To Know

The Southwest flight was in its final approach when air traffic controllers noticed that a private jet, identified as a FlexJet LXJ560, had entered Runway 31C.

A video shows the Southwest plane attempting to land on the runway, then immediately taking off again as the private plane, which had landed, started to cross its path.

Audio recording of communication between the smaller jet and the control tower recorded its pilot misstating instructions from a ground tower employee, who repeated that the pilot should "hold short" of a runway. About 30 seconds later, the ground tower ordered the pilot "hold your position there."

The tower employee is then heard saying: "FlexJet560, your instructions were to hold short of runway 31 center."

Separately, a recording of communication between the Southwest crew and another ground tower employee captured its pilot reporting "Southwest 2504 going around" and following directions to climb back to 3,000 feet.

Seconds later, the audio captures the pilot asking the tower: "Southwest 2504, how'd that happen?"

View this post on X

In a statement released Tuesday, the FAA confirmed that the business jet entered the runway without clearance and that an investigation had started.

"The crew of Southwest Airlines Flight 2504 initiated a go-around when a business jet entered the runway without authorization at Chicago Midway Airport. The FAA is investigating the incident, which occurred around 8:50 a.m. local time on Tuesday, Feb. 25," the agency said.

Southwest Airlines also released a statement and confirmed that Flight 2504 ultimately landed safely.

Southwest

...

"The crew followed safety procedures, and the flight landed without incident," a Southwest spokesperson said in an email to Newsweek.

Flexjet, the small plane's owner, said the company is aware "of the occurrence in Chicago."

"Flexjet adheres to the highest safety standards, and we are conducting a thorough investigation," a spokesperson said in a statement. "Any action to rectify and ensure the highest safety standards will be taken."

Go-arounds, while a routine safety maneuver for pilots, are generally a last resort to avoid unsafe landings. Aviation safety expert John Cox told WBAL-TV that the frequency of go-arounds has been rising due to unexpected aircraft movements on runways.

What People Are Saying

Duffy said Tuesday afternoon on X that while the NTSB and the FAA are investigating, one thing is clear: "However, it is imperative that pilots follow the instructions of air traffic controllers. If they do not, their licenses will be pulled."

A Southwest spokesperson said in an email to Newsweek: "Nothing is more important to Southwest than the safety of our customers and employees."

Aviation safety expert John Cox told WBAL-TV: "These incidents should be extremely rare, yet we've seen an increase in go-arounds due to unexpected aircraft movements on runways."

The FAA, in a statement on Tuesday, said: "The FAA is investigating the incident, which occurred around 8:50 a.m. local time on Tuesday, Feb. 25.

What Happens Next

The National Transportation and Safety Board (NTSB) and FAA are investigating.

Former NTSB member John Goglia stated that the near-crash demonstrated that "the system worked exactly as it was designed to."

He explained that the Southwest pilot recognized the other plane wouldn't stop in time and took the necessary action.

Investigators will likely examine factors such as tower staffing levels and the clarity of instructions given by air traffic controllers, Goglia added.

This story contains reporting by the Associated Press.

Update 02/25/25 2:20 p.m. ET: This article has been updated with additional information.

Update 02/25/25 2:49 p.m. ET: This article has been updated with additional information.

Update 02/25/25 6:42 p.m. ET: This article has been updated with additional information.

Update 02/25/25 7:15 p.m. ET: This article has been updated with additional information.

View 0 Comments

Request Reprint & Licensing

Submit Correction

View Editorial & AI Guidelines